KAI SELECT100 DH3002: A Grater with an Angled Tray and Draining Insert
Key Facts
Identity: DH3002; JAN 4901601413366.
Listed dimensions and weight: 314 × 92 × 81mm; 187g; grating plate approximately 92mm wide.
Materials: ABS-resin grater, container and draining-insert frame; nylon mesh; polyurethane non-slip feet.
Component heat resistance: ABS 100°C; nylon 140°C; polyurethane 120°C. Sudden temperature changes remain prohibited within those limits.
Origin and care: China; dishwasher compatible, but keep away from the dishwasher heater.
Unknown: Rated load, precise tooth dimensions, dedicated sharpening instructions and quantified performance.
Product overview
DH3002 is a long grater supplied with a receiving tray and a mesh insert for draining liquid. It is not simply a small metal rasp: KAI specifies ABS resin for the grater and tray, nylon for the mesh and polyurethane for the feet. The exact model and components matter when choosing a cleaning method.
Two angles serve different purposes
KAI describes the grating teeth as set at roughly 45 degrees and the tray as supporting the grater at about 7 degrees. The first figure concerns the teeth; the second concerns the working slope. Neither figure is a tested measure of how much effort an individual user will save.
Who it suits, and where not to generalise
The manufacturer presents the width and long grating surface as useful for larger ingredients such as daikon. The draining insert supports separating some excess moisture from the grated result. Consider those functions if wet grated vegetables are the task, rather than assuming the same tool is proven for every hard ingredient, citrus zest or cheese.
Comfort and speed are manufacturer claims
The maker links its tooth spacing, height and arrangement with easier, faster grating, and the angled handle with reduced wrist burden. We have not measured force, preparation time, fatigue or the resulting texture. These explanations should not become a performance ranking or a recommendation for a particular medical or ergonomic need.
Care: dishwasher compatible does not mean unrestricted heat
KAI permits dishwasher use but specifically warns against placing the product near the heater. It also warns against sudden temperature changes even below the listed component limits, because distortion can occur. The 140°C figure belongs to the nylon mesh, not every part of the assembled grater.
FAQ: Can I treat it like a stainless-steel grater?
The material listing does not support that description. It identifies resin components and a nylon mesh rather than a stainless grating plate. A metal-grater sharpening or abrasive-cleaning method should not be imported into this profile; a dedicated procedure of that kind was not established in the reviewed sources.
Before buying and research limits
Check the full 314 × 92 × 81mm footprint, the components supplied and the tasks for which you need the draining insert. The Japanese and English manufacturer specifications were retrieved on October 26, 2026. We have not grated food, assessed the feet on a countertop or verified overseas delivery, image rights or purchase value.