PILOT FriXion Ball Knock 05 LFBK-23EF-B: Erasable Black Ink with Important Limits
Key Facts
Identity: LFBK-23EF-B; black ink; JAN 4902505408045.
Ball and writing line: 0.5mm ball diameter; listed writing width 0.25mm.
Mechanism: Clip-slide retracting mechanism.
Listed size and weight: Maximum diameter 11.1mm × total length 146mm; 11.8g.
Materials: Resin and rubber barrel components; precise polymers and manufacturing country unverified.
Black replacement: Manufacturer lists LFBKRF30EF-3B as a three-refill black pack.
Restrictions: Not for writing that must remain, non-paper surfaces or machine-readable answer sheets.
Product overview
The standard black FriXion Ball Knock 05 uses a sliding clip to extend and retract its tip. Its identifying code is LFBK-23EF-B, not the similarly named Knock Zone or a multi-colour FriXion body. PILOT lists both a 0.5mm ball and a narrower 0.25mm writing width; these describe different things.
Erasing changes the ink colour
PILOT explains that rubbing with the dedicated erasing rubber generates heat that makes the ink colourless. This is not evidence that the ink has been physically removed from the page. The system makes corrections possible, but its temperature behaviour also limits where the pen is appropriate.
Who it suits, and who should skip it
It is a candidate for revisable paper notes when disappearance would not create a problem. PILOT expressly rules out certificates, addresses and other writing that must not disappear, and its support page excludes machine-readable answer sheets. An erasable pen should not be chosen for those tasks merely because its black marks look like an ordinary ballpoint’s.
FAQ: Can heat erase a page without rubbing it?
The manufacturer warns that the ink becomes colourless at 60°C or above and says to avoid direct sunlight and hot storage locations. We have not measured transition time or the temperature inside any bag or vehicle. The 60°C warning is not permission to store notes at every lower temperature indefinitely.
FAQ: Is an erased mark permanently gone?
PILOT warns that erased marks may reappear around −10°C. That is a possibility rather than a promise of reliable recovery. We have not tested recovery, and this profile does not recommend erasure as a way to permanently remove confidential information.
Using the erasing rubber
The support instructions say to let the writing dry before rubbing with the dedicated rubber. Dirt on that rubber can transfer to the page, so the maker says to remove it before erasing. Paper type and printing matter: thermal paper and some printed materials may not erase appropriately. No compatibility test with a particular planner or notebook was performed.
Paper only, not a fabric-marking recommendation
The product instructions limit writing to paper. Do not infer fabric suitability from the fact that heat can make the colour disappear: the reviewed instructions do not establish washable marks, residue-free removal or safety for a particular textile. The same caution prevents converting the pen into an all-surface temporary marker.
Refills and normal handling
The exact product listing identifies LFBKRF30EF-3B as the black three-refill pack. PILOT advises using genuine refills, retracting the tip after use and avoiding strong shocks, shaking or writing with the point above horizontal because leaks can occur. Other FriXion bodies or regional packaging should not be assumed equivalent without checking their own compatibility lists.
Sources and research limitations
The exact manufacturer web-catalogue entry, current ink explanation and support cautions were retrieved on October 26, 2026. This resolves the earlier discovery-stage identity gap for this code, but not manufacturing country or untested performance. No pen was used, no overseas checkout was confirmed and no product-image licence was obtained.