Guide / Research-based
Staple-Free or Stapled? Choosing a Japanese Stapler for Your Paper
Choose the KOKUYO Harinacs Press if avoiding punched holes matters most and your paper fits its limits. Consider the Harinacs Handy 10 if you want to avoid metal staples but can accept a binding hole. Choose the MIDORI XS if you prefer a folding stapler that uses replaceable metal staples. The useful distinction is what each method does to your documents, not which product has the largest number on its packaging.
Compare the binding method first
| Product | How it binds | Holes and marks | Published capacity | Consumables |
|---|---|---|---|---|
| KOKUYO Harinacs Press SLN-MPH105PW | Presses sheets together without metal staples | No punched hole; a pressure mark remains | Approximately 5 sheets of 64 g/m² PPC paper | No staples |
| KOKUYO Harinacs Handy 10 SLN-MSH110PW | Staple-free binding that makes a hole in the paper | A binding hole remains | Approximately 10 sheets of 64 g/m² PPC paper | No staples |
| MIDORI XS Stapler 35638006 Black B | Metal staples | Punctures from metal staples (editorial implication) | Up to 10 sheets of copy paper; the cited page does not specify paper weight | No. 10 staples only |
These are manufacturer specifications, not results from a side-by-side test. MIDORI's ten-sheet claim has not been established under the same paper conditions as KOKUYO's. The two ten-sheet figures should not be read as a tie in performance.
When you want to avoid holes
The Harinacs Press SLN-MPH105PW is the relevant choice among these three when you do not want a punched binding hole. It joins the sheets by pressing them together, leaving a visible pressure mark. Choose it only if that mark is acceptable: hole-free binding does not preserve an untouched page.
KOKUYO describes releasing the binding by rubbing the bound area with a hard object, such as a pen cap. That makes the release method useful to consider for a small set of papers you expect to separate later. It is not a promise that the paper will return to its original condition, or that you can bind and release it a particular number of times.
For documents that must remain free of both holes and pressure marks, none of these three binding methods meets that requirement. Keeping the sheets unbound in a folder is a more appropriate starting point.
When avoiding staples matters more than avoiding holes
The Harinacs Handy 10 SLN-MSH110PW removes the need to buy and replenish staples, but it makes a binding hole. Separating the sheets later does not undo that hole.
Its published capacity gives you a different option from the Press for larger sets within the stated paper conditions: approximately ten sheets of 64 g/m² PPC paper, rather than approximately five. That does not establish how either model will work with thicker paper or mixed documents. Choose the Handy 10 when a binding hole is acceptable and a staple-free workflow is useful, rather than treating it as a hole-free Press with a higher capacity.
Neither Harinacs should be selected on the assumption that its holding strength matches a metal staple. KOKUYO explicitly cautions that staple-free binding does not have the same holding strength as metal-staple binding. For papers where accidental separation would cause a problem, that limitation matters more than eliminating staple refills.
When a folding metal-staple format fits your routine
The MIDORI XS Stapler 35638006 Black B is a folding metal-staple option with an integrated remover. Its practical appeal is the combination of a compact storage format, replaceable staples and a way to remove them when sorting papers.
The trade-off is a continuing supply of the correct consumable. MIDORI specifies No. 10 staples only. If you are buying the stapler in Japan and using it elsewhere, establish a source of the specified staples before relying on it as your everyday stapler. Do not assume a staple sold locally under another name is compatible.
The practical implication of a metal staple piercing the sheets is that removing it leaves punctures; this is an editorial observation about the binding method, not a separate MIDORI performance claim. This is a suitable choice when staple holes are acceptable and you are comfortable replenishing and removing staples. The cited capacity is up to ten sheets of copy paper, and MIDORI specifies use with paper only. There is no basis here for ranking its holding strength or paper capacity against these two Harinacs models.
Match the paper as well as the sheet count
KOKUYO's figures use 64 g/m² PPC paper, a stated copier-paper condition. An overseas pack marked 80 g/m² does not match that condition. There is no verified capacity conversion here, so do not assume the published five- or ten-sheet limit carries over unchanged.
KOKUYO also warns that paper quality and thickness affect staple-free binding. For the Press, toner-covered areas and very dry conditions can reduce holding strength. Counting sheets alone therefore misses part of the choice: the paper and the area being bound matter too.
If your intended documents include unusual paper, mixed thicknesses or a printed binding area, check the manufacturer's restrictions for that exact model. This guide does not establish reliable binding for those combinations. It also does not claim that a metal-staple option automatically solves every paper limitation.
Choose for what happens after binding
- Small paper sets that you expect to separate: consider the Press if pressure marks are acceptable and the paper meets its conditions. Its manufacturer-described release method is the relevant advantage, not a claim of mark-free removal.
- Sets where avoiding staple refills matters: consider the Handy 10 if binding holes are acceptable and the set fits the stated paper conditions. Do not trade away a needed level of document security without considering KOKUYO's holding-strength warning.
- A folding stapler to carry and refill: consider the XS if you can obtain No. 10 staples and accept punctures in your papers. Check the exact Black B product rather than assuming all XS listings describe the same variant.
- Sheets that must remain unmarked: leave them unbound. Do not choose any of these methods expecting guaranteed mark-free sheets after removal.
Start with the marks you can accept, then check your paper, sheet count and refill requirements. Those decisions are more useful than choosing a universal winner from capacities measured under different conditions.
Sources and scope
This guide compares manufacturer descriptions and makes editorial recommendations from those stated conditions. It is not a hands-on durability, holding-strength or usability test.
- KOKUYO Harinacs Press product information (Japanese)
- KOKUYO Harinacs Handy 10 product information (Japanese)
- MIDORI official store: XS Stapler 35638006 (Japanese)
