Stationery / Product Profile
PLUS Fitcut Curve SC-175SF: Curved Blades and a Coated Surface
SC-175SF, order code 34-515, white/grey symmetrical Easy Grip
Key Facts
- Exact version
- SC-175SF, order code 34-515, white/grey symmetrical Easy Grip; JAN 4977564534028.
- Listed dimensions
- 174 mm overall length; 65 mm blade length; 1.8 mm blade-plate thickness.
- Blades
- stainless steel with a fluorine-resin coating.
- Other materials
- recycled ABS and TPE grip, POM pivot ring and polypropylene cap; stainless-steel rivet.
- Manufacturing country and weight
- not verified from manufacturer information for this version.
Curved blades and a coated surface address different parts of an everyday cutting task: holding the material and limiting adhesive build-up.
The curve is part of the mechanism
PLUS calls the blade geometry a Bernoulli curve. The maker describes it as maintaining a blade-to-blade angle of approximately 30 degrees as the cut moves from the pivot towards the tip, helping to hold the material being cut. A ring at the pivot is intended to limit wobble, while the two-layer grip combines firmer and softer materials. These are design explanations, not results from our own cutting or comfort tests. Manufacturer’s design explanation
This profile covers the symmetrical-grip SC-175SF, not the asymmetrical SC-175AF or the similarly named SFN. A symmetrical handle should not, by itself, be read as evidence of left-handed blade geometry. Exact-version specifications
Coating is not a permanent condition
The fluorine coating is intended to reduce the adhesion of tape and glue. The model’s manual also says that the coating gradually wears with use. It is therefore more useful to think of it as a surface treatment with a maintenance limit than as a permanent “non-stick” guarantee.
What to cut, and what to avoid
The manual gives paper, envelopes, thin cardboard, cartons, fabric and packaging among its examples. It does not establish a universal maximum cutting thickness. Do not cut wire or metal, force thick material, use the scissors to pry things open, or continue using damaged or deformed scissors. Do not dismantle them; keep them out of young children’s reach.
Wipe the scissors dry if they get wet, and keep oil and chemicals away from the grip and pivot ring. For adhesive left on the blades, PLUS describes lifting it with cellophane tape; the sharp edges still require care. The coating is not a reason to leave the tool wet. SC-175SF instructions
Sources and method
This profile uses PLUS’s specifications, design description and model-specific instructions. We have not tested cutting force, coating life or durability. Manufacturer comparisons are not presented as independent performance findings.
