Stationery / Product Profile
Tombow PiT AIR PN-MAS
PN-MAS, standard 8.4 mm x 16 m
Key Facts
- Version
- PN-MAS, standard model; JAN 4901991655407.
- Tape
- 8.4 mm wide, 16 m long.
- Refill
- PR-MAS; not the mini cartridge.
- Case dimensions
- 43 × 26 × 96 mm, from the maker’s launch specification.
- Unverified
- manufacturing country, weight and exact polymer or adhesive composition.
PiT AIR changes how an adhesive-tape runner starts and stops. Its head is part of the reel-control mechanism, not simply the point where glue reaches paper.
A head-operated lock
Tombow explains that pressure against paper unlocks the supply reel; lifting the head locks it again. Its mesh-pattern adhesive and following head are intended to support transfer and clean stopping. Design account
This is a mechanism description, not evidence that this particular runner is easier to use than another. Envelope sealing and paper assembly are relevant uses; we have not tested bond strength or noise.
Use it slowly and in straight runs
Open the cover, press the head firmly against the paper and pull slowly. Stop, then lift diagonally. Avoid curves and zigzags, clean away water, oil and dirt, and work at 15–35°C. Fast pulling can tear some papers; some printed surfaces may not take the adhesive. Test important work first.
Refill with the cover open
Open the head cover before opening the case with its underside button. Insert the refill, take up any slack in the marked reel direction, and close until it clicks. Tombow suggests replacing the body after roughly ten refills to help prevent slack, rather than promising indefinite reuse.
Keep the head covered in storage, away from infants, heat, humidity, sunlight and abrupt temperature changes. Use only as an adhesive. Use and care
Sources and method
The standard model is matched to Tombow’s official identification table, separately from trial, mini and fishing-net-recycled versions. This is a source-based profile, not a test of long-term sealing, archival stability or durability.
